To Next Page
S
Stacey HansenAug 3, 2025
What to do if my Optima Scale Scales shows Err6?
- KKelly PerezAug 3, 2025
If your Optima Scale Scales displays 'Err6', it means the load is exceeding the zero range. To resolve this, check the crane load.
What to do if my Optima Scale Scales shows Err6?
If your Optima Scale Scales displays 'Err6', it means the load is exceeding the zero range. To resolve this, check the crane load.
Safety guidelines for operating the weighing scale, emphasizing secure hanging and avoiding exceeding load limits.
Details the function of each key (ON/OFF, ZERO, TARE, HOLD, 2ND) and display indicators (STB, hold, units, battery).
Steps to enter calibration mode, including password entry and unit selection (KG/Lb).
Procedure for performing zero calibration and loading calibration weights to set the scale's accuracy.
Procedure to enter parameter settings and use keys to change values for various functions.
Lists common error codes (Err6, U 628, Overload) and their corresponding reasons and solutions.
Safety guidelines for operating the weighing scale, emphasizing secure hanging and avoiding exceeding load limits.
Details the function of each key (ON/OFF, ZERO, TARE, HOLD, 2ND) and display indicators (STB, hold, units, battery).
Steps to enter calibration mode, including password entry and unit selection (KG/Lb).
Procedure for performing zero calibration and loading calibration weights to set the scale's accuracy.
Procedure to enter parameter settings and use keys to change values for various functions.
Lists common error codes (Err6, U 628, Overload) and their corresponding reasons and solutions.
General| Auto Power Off | Yes |
|---|---|
| Overload Indicator | Yes |
| Low Battery Indicator | Yes |
| Display | LCD |
| Units | lb / kg |
