Do you have a question about the Optimate tecMATE TM-524 and is the answer not in the manual?
Automatic solar charge controller for lead-acid batteries with 6W solar panel, 12V output.
Automatic solar charge controllers for lead-acid batteries, desulphates, charges, maintains.
Details battery types like Flooded STD, Sealed AGM-MF, GEL, and CYCLIC CELL.
Explicitly states not to use for NiCd, NiMH, Li-Ion, or non-rechargeable batteries.
Covers explosive gases, corrosive acid, protective gear, and lead/connector condition.
Charger withstands spills but prolonged exposure to liquids can cause damage.
Describes battery clips and metal eyelet lugs for vehicle or off-vehicle connection.
Step-by-step instructions for connecting the charger to the battery safely.
Visual guide to LED #1 (SOLAR) and LED #2 (CHARGE) status indicators.
Instructions for connecting the solar panel and the battery to the charger.
Details Recovery, Bulk, and Long-Term Maintenance modes based on LED feedback.
Explains behavior during low voltage, high current draw, or power loss.
Guidance on solar panel sizing, battery recovery, testing, and maintenance checks.
Details the three-year limited warranty against defects in material or workmanship.
Specifies warranty responsibilities for Canada, USA, Central America, and South America.
Adapter for charging from AC power when solar power is unavailable.
Information on extender cables, AUTO plug, and OBDII auto adapter.
| Type | Battery Charger |
|---|---|
| Model | tecMATE TM-524 |
| Output Voltage | 12V |
| Battery Size | 3-50Ah |
| Input Voltage | 100-240V AC |
| Output Current | 0.8A |
| Battery Type | AGM, Gel |
| Charging Modes | Bulk, Absorption, Maintenance |
| Protection Features | Reverse polarity, short-circuit |
Loading...