Optimate 3 TM431 - User Manual

INSTRUCTIONS FOR USE
IMPORTANT: Read completely
before charging
MODE D’EMPLOI
IMPORTANT: à lire avant
d’utiliser l’appareil
ANWENDUNGSVORSCHRIFTEN
WICHTIG: Vollständig vor der
Benutzung lesen
GEBRUIKSAANWIJZING
BELANGRIJK: Lees volledig
voor gebruik
MODO DE EMPLEO
IMPORTANTE: a leer antes de
utilizar el aparato
INSTRUÇÕES DE UTILIZAÇÃO
IMPORTANTE: Ler antes de
utilizar.
ISTRUZIONI PER L’USO
IMPORTANTE: da leggere prima
di utilizzare l’apparecchio
INSTRUKTIONER
VIKTIGT: läs följande fullständiga
instruktioner för användningen
innan du använder laddaren
ИНСТРУКЦИЯ ПО ПРИМЕНЕНИЮ
ВАЖНО: Прочти полностью
перед использованием
Automatic charger for 12V lead-acid batteries • Chargeur automatique pour batteries 12V
plomb-acide • Cargador automático para baterías 12V plomo-ácido • Carregador automático
para baterias de 12V chumbo-ácido • Automatische Ladegerät für 12V Blei-Säure Batterien
• Automatische lader voor 12V loodzuur accu’s • Caricabatterie automatico per batterie
12V piombo-acido • Automatisk diagnostisk laddare för 12V blybatterier • Автоматическое
зарядное устройство для 12В свинцово кислотных аккумуляторных батарей
1 x 12V
STD / AGM-MF / GEL / CYCLIC CELL
2.5 - 50Ah
+-
MODEL: TM430 / TM431 / TM432
AC: 100 – 240VAC 50-60Hz
0.23A @ 100Vac / 0.15A @ 240Vac
DC: 0.8A 12V
2 x 12V
STD / AGM-MF / GEL / CYCLIC CELL
2.5 - 50Ah
+-
MODEL: TM450 / TM451 / 452
AC: 100 – 240VAC 50-60Hz
0.46A @ 100Vac / 0.30A @ 240Vac
DC: 2 x 0.8A 12V (independent)
4 x 12V
STD / AGM-MF / GEL / CYCLIC CELL
2.5 - 50Ah
+-
MODEL: TM454 / TM455 / 456
AC: 100 – 240VAC 50-60Hz
0.92A @ 100Vac / 0.60A @ 240Vac
DC: 4 x 0.8A 12V (independent)
copyright © 2019 TecMate International
TM430-IN1-190708

Summary

Instructions for Use

LED Indicator Guide

LED #1 AC POWER

Confirms AC power supply to the charger.

LED #2 REVERSE POLARITY

Indicates incorrect DC connection polarity.

LED #3 SAVE; SOC: 0 -49%

Battery saving mode for low charge states.

LED #4 CHARGE; SOC: 50%+

Battery charging status for medium charge states.

LED #5 MAINTAIN; SOC: 100%; SOH:

Battery maintenance and full charge status.

LED #6 BATTERY SOH:

Indicates battery health status or problems.

Important Safety Instructions for Canada & USA

Personal Precautions

Personal safety precautions for working near batteries.

Preparing to Charge

Steps to prepare the battery and environment for charging.

Charger Location

Guidelines for placing the charger safely and effectively.

DC Connection Precautions

Safety measures for connecting DC output clips to the battery.

Connecting Battery When Installed in Vehicle

Procedure for connecting the charger to a battery inside a vehicle.

Connecting Battery When Outside Vehicle

Procedure for connecting the charger to a battery outside a vehicle.

Using the OptiMate 3

Deep Discharge Save Mode

Charger operation for deep discharged or sulphated batteries.

Charge and Verification

Details on the charging process and battery verification.

Battery Ready; 24-7 Maintenance

Status and maintenance mode for a charged battery.

Battery Not Holding Charge

Indication and troubleshooting for batteries that do not hold charge.

Product Information

Certification and Conformity

Details on safety, EMC, and energy efficiency certifications.

Mechanical Specifications

Physical characteristics like IP rating, dimensions, and weight.

Electrical Specifications

Electrical ratings including input, output, and protection features.

Optimate 3 TM431 Specifications

General

Output Voltage	12V
Output Current	0.8A
Weight	0.5 kg
Input Voltage	100-240V AC
Battery Types Supported	AGM, Gel, Lithium
Protection Features	Reverse polarity, Short circuit, Overcharge
Charge Steps	6-step charging process