Instruction Manual
and Owner’s Guide
20” Oscillating Industrial High
Velocity Stand Fan
Model: F-4205
INFORMATION HOTLINE: If, after reading this owner’s guide,
You have any questions or comments, please feel free to write us or call us at
1-888-672-5832. Our customer service representative will be happy to help you.
PLEASE READ AND SAVE THESE INSTRUCTIONS
IMPORTANT INSTRUCTIONS:
Thank you for choosing an Optimus fan. To ensure the best performance from your
Fan, please read and save the following instructions.
WHEN USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE
FOLLOWING:
Read all instructions before using this product.
Use this fan only as described in this manual. Any other use not recommended by the
manufacturer may cause fire, electrical shock or injury, and may void the warranty.
Always unplug the unit before assembling, disassembling or cleaning.
Always unplug the unit when not in use or when moving from one location to another.
To disconnect, grip the plug and pull it from the wall outlet. Never yank the cord.
The use of attachments not recommended or sold by the appliance manufacturer may
cause hazards.
Avoid contact with moving parts.
DO NOT operate this fan with a damaged cord or plug, after a malfunction, or is
dropped or damaged in any manner. Return the unit to Optimus Enterprise, Inc. for
examination, electrical or mechanical adjustment, or repair.
DO NOT operate this fan in the presence of explosive and/or flammable fumes.
DO NOT place the fan or any parts near an open flame, cooking or other heating
appliance.
Extreme caution is necessary when fan is used by or near children or invalids and
whenever the fan is left operating and unattended.
This product is intended for industrial and commercial use only.
Always use on a dry level surface.
DO NOT operate if the fan housing is removed or damaged.
A loose fit between the AC outlet and plug may cause over heating of the plug. Have a
qualified electrician replace the outlet.
DO NOT run cord under carpeting. Do not cover cord with throw rugs, runners or like.
Arrange cord away from traffic area and where it could be tripped over.
This fan has a three prong grounded plug that must be inserted into a matching outlet
to reduce the risk of electrical shock. Do not defeat this safety feature.
This product employs an overload protection (fuse). A blown fuse indicates an
overload or short-circuit. If the fuse blows, unplug the product from the outlet. Replace
the fuse as per the Maintenance Instructions (follow product marking for proper fuse
rating). If the replacement fuse blows, a short-circuit may be present and the product
should be discarded or returned to Optimus Enterprise, Inc. for examination and/or
repair.
NEVER connect the fan to any power sources other than a 120 volt alternating current
polarized outlet.
WARNING: To reduce the risk of electric shock. DO NOT use this fan with any
solid-state speed control and DO NOT insert finger or any object into grill.
To Next Page
Need help?
General
