EasyManua.ls Logo

Optoma DLP - Projector Specifications

Optoma DLP
77 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
75
ADDITIONAL INFORMATION
Specications
Optical Description
Maximum resolution 4K UHD
Native resolution 2716 x 1528
Lens Manual zoom and manual focus adjustment
Image size (diagonal) 26.45”~302.2” (focus range, optimized @ wide 60” image size)
Projection distance 1.3m ~ 9.3m (focus range, optimized @ wide 1.846m)
Electrical Description
Inputs
HDMI 1.4b
HDMI V2.0 HDCP2.2 / MHL V2.2
VGA In (supports YpbPr)
Audio In 3.5mm
RS232C male (9-pin D-SUB)
RJ-45 (supports web control)
USB type A
Outputs
Audio Out 3.5mm
SPDIF Out
12V Trigger (3.5mm jack)
Control USB type A for service
Color reproduction 1073.4 Million color
Scan rate
Horizontal scan rate: 31.000~135.000KHz
Vertical scan rate: 24~120Hz
Built-in speaker Yes, 2x 5W
Power requirement 100 - 240V ±10%, AC 50/60Hz
Input current 3.8A
Mechanical Description
Installation orientation Front, Rear, Ceiling-top, Rear-top
Dimensions 498.1mm (W) x 331.1mm (D) x 154mm (H) (without feet)
Weight Less than 10kg
Environmental conditions Operating in 5~40°C , 10% to 85% humidity (non-condensing)
Note: All specications are subject to change without notice.

Table of Contents

Related product manuals