Optoma DV10 MovieTime User Manual

DVD Projector
*
37

ENGLISH
Menu Location
Choose the menu location on the display screen.
Projection
▀■ Front-Desktop
The factory default setting.
▀■ Rear-Desktop
When you select this function, the projector reverses the image
so you can project from behind a translucent screen.
Signal Type
Select signal type RGB or Video sources.
Source Lock
When this function is turned off, the projector will search for other
signals if the current input signal is lost. When this function is
turned on, it will search specified connection port.
High Altitude
Choose “ON” to turn on High Altitude mode. Operates the fans at
full speed continuously to allow for proper high altitude cooling of
the projector.
Reset
Choose “Yes” then “Enter” pressed, the display parameters on this
menu will return to their factory default settings.
System

Optoma DV10 MovieTime Specifications

Display

display type	0.54-inch DarkChip2 DLP
native resolution	854 x 480 (480p)
resized resolution	1400 x 1050 (SXGA+)

Brightness and Contrast

brightness	1000 Lumens
contrast ratio	4000:1
lamp type and life	200-watt P-VIP lamp, 2, 000 (BriteMode), 3, 000 hours (STD)

Projection

throw ratio	1.26:1 – 1.4:1
image size	48 to 359 inches
projection distance	4.9 to 32.8 feet

Compatibility

image compatibility	XGA, SVGA, VGA, VESA, Mac, SXGA+, JPEG image
video compatibility	SDTV (480i), EDTV (480p), 576i/p, HDTV (720p, 1080i) NTSC/PAL/SECAM, DVD, VCD, SVCD, Kodak picture CD, DVD Region Code: 1
audio compatibility	MP3, WMA, Audio CD, DTS, THX, Dolby Digital®

Power and Operating Conditions

power supply	100-240 volts, 180 watts, 50/60 Hz
operating temperature	50° – 104°F (10° – 40°C)
humidity	80% maximum

Physical Characteristics

dimensions	14.5 x 4.6 x 10.7 inches (368 x 117 x 273 mm)
weight	7.8 pounds (3.53 kg)
noise level	27 dB