Need help?Do you have a question about the Optoma EH503 and is the answer not in the manual?
Display Specifications| Display Technology | Single 0.65” DC3 DLP Technology by Texas Instruments |
|---|---|
| Native Resolution | 1920 x 1080 |
| Maximum Resolution | 1920 x 1200 |
| Brightness | 5000 lumens |
| Contrast Ratio | 2000:1 |
| Displayable Colors | 1.07 Billion |
Lamp and Projection| Lamp Life (Standard/Bright) | 3500/1500 Hours |
|---|---|
| Lamp Type | 370W P-VIP |
| Projection Method | Front, rear, ceiling mount, table top |
| Keystone Correction | ±15° Vertical |
| Lens Shift | Vertical -30% to +50%, Horizontal ±10% |
Audio and Noise| Audio Output | Two 3-Watt speakers |
|---|---|
| Noise Level (Standard) | 37dB |
| Remote Control | Fully-featured IR remote |
Operating Environment| Operating Temperature | 41–113°F (5–45°C) |
|---|---|
| Humidity | 85% max |
| Fan Speed Adjustment | Adjustable for high altitude |
Power| Power Supply | AC Input 100–240V, 50–60Hz |
|---|---|
| Power Consumption (Bright) | 480W max |
| Power Consumption (Standard) | 330W |
| Power Consumption (Standby) | <0.5 Watt |
Ports and Interfaces| I/O Connection Ports | Display port, HDMI, DVI-D w/ HDCP, two VGA-in, VGA-out, S-video, composite video, component video, five BNC (RGBHV/YPbPr), two stereo mini jack audio-in, two RCA stereo audio-in, audio-out, 3D VESA port, wired remote, USB-A charging port, RS-232C, RJ45, and 12V trigger |
|---|---|
| Monitor Loop Through | D-Sub 15 pin VGA output |
| Audio Monitor Loop Through | VAO audio out, HDMI VAO audio out |
Physical Specifications| Weight without Lens | 18.6 lb (8.4 kg) |
|---|---|
| Dimensions (W x D x H) | 16.9” x 7.1” x 13.4” (430 x 181 x 340 mm) |
| Security | Kensington lock port, security bar and keypad lock |
To Next Page
