To Next PageTo Next Page
Need help?Do you have a question about the Optoma EH501 and is the answer not in the manual?
Read all instructions before operating the projector and save for future reference.
Explains the functions of the buttons on the projector's control panel.
Identifies and describes the various input/output ports on the projector.
Details the functions of each button on the remote control.
Guides on connecting PCs and monitors using VGA or DVI cables.
Explains how to connect various video sources like HDMI, Component, S-Video, and Composite.
Details the steps for turning the projector on and off safely.
Guides on navigating and using the projector's on-screen display (OSD) menus.
Configures Crestron, Extron, PJLink, AMX, Telnet, and HTTP network control.
Manages sleep timers, quick resume, power modes, lamp settings, and filter reminders/resets.
Guides on connecting and controlling the projector via a wired LAN connection.
Explains how to connect and control the projector wirelessly using an Optoma dongle.
Details controlling the projector via its web interface, including status and setup.
Instructions for downloading and installing the Optoma Presenter software.
Guides on searching, connecting, and managing projectors with Optoma Presenter.
Steps to plug in and display images from a USB drive.
Recommends replacing the lamp when brightness decreases and provides safety notes.
Defines the format for sending Telnet commands to the projector.
Outlines the structure and parameters for PJLink commands.
Read all instructions before operating the projector and save for future reference.
Explains the functions of the buttons on the projector's control panel.
Identifies and describes the various input/output ports on the projector.
Details the functions of each button on the remote control.
Guides on connecting PCs and monitors using VGA or DVI cables.
Explains how to connect various video sources like HDMI, Component, S-Video, and Composite.
Details the steps for turning the projector on and off safely.
Guides on navigating and using the projector's on-screen display (OSD) menus.
Configures Crestron, Extron, PJLink, AMX, Telnet, and HTTP network control.
Manages sleep timers, quick resume, power modes, lamp settings, and filter reminders/resets.
Guides on connecting and controlling the projector via a wired LAN connection.
Explains how to connect and control the projector wirelessly using an Optoma dongle.
Details controlling the projector via its web interface, including status and setup.
Instructions for downloading and installing the Optoma Presenter software.
Guides on searching, connecting, and managing projectors with Optoma Presenter.
Steps to plug in and display images from a USB drive.
Recommends replacing the lamp when brightness decreases and provides safety notes.
Defines the format for sending Telnet commands to the projector.
Outlines the structure and parameters for PJLink commands.
Display| native resolution | 1920 x 1080 |
|---|---|
| maximum resolution | 1080p (1920 x 1080) |
| brightness | 5000 lumens |
| contrast ratio | 15, 000:1 |
| displayable colors | 1.07 billion |
Lamp| lamp life (eco+ mode) | 4000 hours |
|---|---|
| lamp life (eco mode) | 3000 hours |
| lamp life (normal mode) | 2500 hours |
| lamp type | 280W |
Projection| projection distance | 1.0–10 m |
|---|---|
| image size (diagonal) | 0.6–7.62 m |
| throw ratio | 1.37–2.05 |
| lens shift | Vertical 115% ~ 134% |
Audio| audio output | two 15-watt speakers |
|---|---|
| noise level (standard/bright) | 27dB |
Power| power supply | 100–240V, 50–60Hz |
|---|---|
| power consumption (normal) | 355W |
| power consumption (eco+) | 279W |
| power consumption (standby-eco) | <0.5W |
Operating Environment| operating temperature | 5–45°C |
|---|---|
| maximum humidity | 85% |
Weight and Dimensions| weight | 4.5 kg |
|---|---|
| dimensions (w x h x d) | 386 x 152 x 279 mm |
