EN-45
MAC Address: a read-only display of MAC Address.
IP Address: a read-only display of IP Address.
SSID: Display the projector’s SSID information.
Connection Mode: Methods for connecting to wireless networks with Wi-
Fi enabled devices.
Control Settings
Allow you to configure nework settings.
Crestron: Turn on or off Crestron. *Note: Port 41794
Extron: Turn on or off Extron. *Note: Port 2023
PJ Link: Turn on or off PJ Link. *Note: Port 4352
AMX Device Discovery: Turn on or off AMX Device Discovery. *Note:
Port 9131
Telnet: Turn on or off Telnet. *Note: Port 23
HTTP: Turn on or off HTTP. *Note: Port 80
To Next Page
Loading...
