Need help?Do you have a question about the Optoma EH512 and is the answer not in the manual?
General| Matrix size | 0.65 \ |
|---|---|
| Matrix type | DMD |
| Native aspect ratio | 16:9 |
| Projection distance | 1.3 - 9.4 m |
| Vertical scan range | 24 - 85 Hz |
| Horizontal scan range | 15.375 - 91.146 kHz |
| Projection technology | DLP |
| Supported aspect ratios | 4:3, 16:9 |
| Contrast ratio (dynamic) | - |
| Contrast ratio (typical) | 15000:1 |
| Screen size compatibility | 26.2 - 301.1 \ |
| Projector native resolution | 1080p (1920x1080) |
| Keystone correction, horizontal | -20 - 20 ° |
| Lamp power | 330 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 3000 h |
| Service life of light source (economic mode) | 5000 h |
| Offset | 99 % |
| Throw ratio | 1.41 - 2.24:1 |
| Zoom capability | Yes |
| Focal length range | 20.91 - 32.62 mm |
| Aperture range (F-F) | 2.5 - 3.25 |
| Vertical lens shift range | 0 - 17 % |
| Placement | Desktop, Ceiling |
| Product type | Standard throw projector |
| Product color | White |
| Market positioning | Presentation |
| Cable lock slot type | Kensington |
| DVI port | No |
| HDMI version | 1.4a |
| Composite video in | 1 |
| HDMI connector type | Full-size |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| S-Video inputs quantity | 0 |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Analog signal format system | NTSC 3.58, NTSC 4.43, NTSC J, NTSC M, PAL 4.43, PAL B, PAL D, PAL G, PAL H, PAL I, PAL L, PAL M, PAL N, SECAM 4.25/4.4, SECAM B, SECAM D, SECAM G, SECAM K, SECAM K1, SECAM L |
| Supported graphics resolutions | 640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1600 x 1200 (UXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA) |
| Power source | AC |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 390 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 310 W |
| Noise level | 30 dB |
| Number of OSD languages | 21 |
| On Screen Display (OSD) languages | ARA, CZE, DAN, DEU, DUT, ENG, ESP, FAS, FIN, FRE, GRE, HUN, ITA, NOR, POL, POR, RUM, RUS, SWE, TUR |
| Operating altitude | 0 - 3000 m |
| Operating temperature (T-T) | 5 - 40 °C |
| Operating relative humidity (H-H) | 0 - 85 % |
| RMS rated power | 20 W |
Weight and Dimensions| Depth | 295 mm |
|---|---|
| Width | 369 mm |
| Height | 132 mm |
| Weight | 4600 g |
Guide to installing the USB Wi-Fi dongle for wireless projection functionality.
Steps to configure HDCast Pro for wireless projection and screen mirroring.
How to use the projector's built-in USB reader to view photos and documents.
Details on controlling photo playback, zoom, pan, and slideshow features.
Instructions for navigating and controlling document playback like zooming and paging.
Guide to mirroring iOS or Android screens to the projector using a USB cable.
Instructions for wireless projection using a Wi-Fi dongle and mobile app.
Specifies the necessary operating system, CPU, memory, and graphics card for features.
To Next Page
