Optoma HD145X - Page 33

English
33
USING THE PROJECTOR
Gamma
Set up gamma curve type. After the initial setup and ne tuning is completed, utilize the Gamma Adjustment steps
to optimize your image output.
 Film: For home theater.
 Video: For video or TV source.
 Graphics: For PC / Photo source.
 Standard(2.2): For standardized setting.
 1.8 / 2.0 / 2.4: For specic PC / Photo source.
Color Settings
Congure the color settings.
 BrilliantColor
TM
: This adjustable item utilizes a new color-processing algorithm and enhancements to
enable higher brightness while providing true, more vibrant colors in picture.
 Color Temperature: Select a color temperature from Warm, Standard, Cool, or Cold.
 Color Matching: Select the following options:
± Color: Adjust the red (R), green (G), black (B), cyan (C), yellow (Y), magenta (M), and white (W)
level of the image.
± Hue / R(red)*: Adjust the color balance of red and green.
Note: *If the Color setting is set to white (W), you can adjust the red color setting.
± Saturation / G(green)*: Adjust a video image from black and white to fully saturated color.
Note: *If the Color setting is set to white (W), you can adjust the green color setting.
± Gain / B(blue)*: Adjust the image brightness.
Note: *If the Color setting is set to white (W), you can adjust the blue color setting.
± Reset: Return the factory default settings for color matching.
± Exit: Exit the “Color Matching” menu.
 RGB Gain/Bias: This settings allows to congure the brightness (gain) and contrast (bias) of an
image.
± Reset: Return the factory default settings for RGB gain/bias.
± Exit: Exit the “RGB Gain/Bias” menu.
 Color Space (HDMI input): select an appropriate color matrix type from the following: Auto,
RGB(0-255), RGB(16-235), and YUV.
Dynamic Black
Use to automatically adjust the picture brightness to give optimum contrast performance.
Brightness Mode
Adjust the brightness mode settings for lamp-based projectors.
 Bright: Choose “Bright” to increase the brightness.
 Eco.: Choose “Eco.” to dim the projector lamp which will lower power consumption and extend the
lamp life.
Reset
Return the factory default settings for color settings.