K
Kevin CannonJul 26, 2025
What to do if my Optoma Projector shows an Over Temp error?
- DDr. Erin GrahamJul 27, 2025
If your Optoma Projector displays an 'Over Temp' error, allow the projector to cool down completely before attempting to restart it.
To Next PageTo Next PageWhat to do if my Optoma Projector shows an Over Temp error?
If your Optoma Projector displays an 'Over Temp' error, allow the projector to cool down completely before attempting to restart it.
What to do if I see a 'Lamp failed' error on my Optoma HD80 Projector?
If your Optoma Projector shows a 'Lamp failed' error, check the lamp to ensure it is working correctly. Replace the lamp if necessary.
Why does my Optoma Projector show a 'Fan failed' error, and how can I fix it?
If your Optoma Projector displays a 'Fan failed' error, inspect the fan for any obstructions that may be preventing it from working. If there are no obstructions and the fan still fails, replace it.
Operating Environment| noise level | 32 dB |
|---|---|
| storage temperature | -20 to 60 °C |
| operating temperature | 5 to 35 °C |
Power| power supply voltage | 90-264V |
|---|---|
| power supply frequency | 50-60 Hz |
| power consumption | 430 W |
Display| brightness | 1300 ANSI Lumens |
|---|---|
| native resolution | 1920 x 1080 |
| contrast ratio | 10, 000:1 |
Projection| throw ratio without anamorphic lens | 1.85-2.22:1 |
|---|---|
| projection distance | 1.5 to 10 m |
| image size | 0.8 to 7.6 m |
Interfaces| hdmi ports | 2 |
|---|---|
| dvi port with hdcp | 1 |
| s-video port | 1 |
Weight and Dimensions| weight | 4.5 kg |
|---|---|
| width | 406 mm |
| height | 117 mm |
| depth | 310 mm |
