To Next PageTo Next Page
Need help?Do you have a question about the Optoma HD82 and is the answer not in the manual?
Display| display technology | Single 0.65” DarkChip3 DMD DLP |
|---|---|
| brightness | 1300 ANSI Lumens |
| resolution | 1920 x 1080 |
Power| power supply | AC Input 100-240V, 50-60 Hz |
|---|---|
| power consumption max | 345W |
| power consumption min | 232W |
Operating Environment| operating temperature | 5 - 35°C |
|---|---|
| storage temperature | -20 - 60°C |
| humidity | 80% |
Weight and Dimensions| weight | 8.4 kg |
|---|---|
| dimensions (W x H x D) | 371 x 194 x 490 mm |
General safety warnings and precautions for using the projector.
Detailed warnings and precautions for projector operation and maintenance.
Guidelines on proper usage, handling, and environmental conditions for the projector.
Important advice on protecting eyes from the projector's light beam.
Lists and illustrates all items included in the projector's box.
Details the main unit of the projector, identifying its key components and features.
Identifies and describes all input and output ports on the projector.
Explains the functions of each button on the projector's remote control.
Covers the backup remote control features and the process for replacing its battery.
Instructions for connecting the projector to computer sources via VGA or DVI.
Instructions for connecting the projector to video sources using Composite, S-Video, or SCART.
Detailed steps for turning on the projector and selecting the input source.
Procedures for shutting down the projector and understanding warning light indicators.
How to adjust the projector's height using its adjustable feet.
Using the PureShift feature for horizontal and vertical image position adjustments.
Detailed guide on adjusting the horizontal position of the projected image.
Table and explanation for adjusting the projected image size based on screen dimensions.
Explains the primary functions of the remote control buttons.
Guide on how to navigate and operate the projector's on-screen display menus.
Explains image settings like Mode, Contrast, Brightness, Color, Tint, and Sharpness for picture adjustment.
Covers Noise Reduction, Gamma, B/W Extension, Color Temp, PureEngine, DynamicBlack, RGB Gain/Bias.
Covers Format, Overscan, Edge Mask, V Image Shift, V Keystone, SuperWide.
Covers Menu Location, Projection, Image AI, Test Pattern, Background Color, 12V Triggers, Lamp Settings.
Covers Language, Input Source, Source Lock, High Altitude, Auto Power Off, Signal, Color Space, Reset.
Solutions for common image-related issues like no image or stretched image.
Addresses image size, orientation, unresponsiveness, and lamp sounds.
Explains LED states and on-screen messages for projector status.
Troubleshooting for remote control malfunctions and lamp-related messages.
Provides warnings and step-by-step instructions for replacing the projector lamp module.
Lists supported display modes, resolutions, and frequencies for analog and digital inputs.
Details RS232 pin assignments, commands, and functions for projector control.
Guidelines and specifications for mounting the projector on a ceiling.
Contact information and addresses for Optoma support offices worldwide.
FCC compliance, Canadian notices, EU declarations, and disposal instructions.
