Optoma TW775 - Direct Power on; Auto Power off; Sleep Timer

English
52
Options | Advanced
Direct Power On
Enable or disable Direct Power On.
4
On—the projector powers on automatically when AC power is supplied.
4
Off— the projector must be powered on as normal.
Auto Power Off
Set the Auto Power Off interval. The projector powers off the lamp after
30 minutes of no signal by default. The following warning is displayed 60
seconds before power off.
Sleep Timer
Set the Sleep Timer interval. The projector powers off after the specied
time period of inactivity (regardless of signal). The following warning is
displayed 60 seconds before power off.
Power Mode (Standby)
4
Eco.: Choose “Eco.” to save power dissipation further < 1W.
4
Active: Choose “Active” to return to normal standby and the VGA
out port will be enabled.
User Controls
v When Power
mode (Standby)
is set to Eco, the
VGA & Audio
pass-through,
RS232 and RJ45
will be deacti-
vated when the
projector is in
standby.