Optoma TX542-3D User Manual

© Copyright 2010 Optoma Technology, Inc. DLP
®
and the DLP logo are registered trademarks of Texas Instruments. All other trademarks are the property of their
respective owners. All specifications subject to change at any time.
www.optoma.ca
Computer Compatibility
UXGA, WXGA, SXGA+, SXGA, XGA,
SVGA, VGA Resized, VESA, PC and
Macintosh Compatible
Video Compatibility
NTSC, PAL, SECAM, SDTV (480i), EDTV
(480p), HDTV (720p, 1080i/p)
3D Compatibility
120Hz Frame Sequential 3D for
Resolutions Up to 720p, 60Hz Field
Sequential 3D for Resolutions Up to 480i
Horizontal Scan Rate
15.3 to 91.1 KHz
Vertical Refresh Rate
25 to 120 Hz
Loop Through
Monitor: D-Sub 15-Pin VGA Output
Audio: Stereo Mini-Jack Output
(Functional in Both Normal and Standby
Modes)
Projection Lens
F= 2.4-2.66, f= 18.2-21.8mm,
1.2x Manual Zoom and Focus
User Controls
Complete On-Screen Menu Adjustments
in 23 Languages
I/O Connectors
HDMI, Two VGA-In, VGA-Out, S-Video,
Composite Video, Three Stereo
Audio-In, Stereo Audio-Out, RJ45,
RS-232 and USB
Security
Kensington
®
Lock, Security Bar and
Keypad Lock
Projection Method
Front, Rear, Ceiling Mount, Table Top
Weight
6.4 lbs (2.9kg)
Dimensions (W x H x D)
12.76” x 3.82” x 9.21”
(324 x 97 x 234 mm)
Noise Level (STD/Bright)
29dB/31dB
Operating Temperature
41 to 104°F (5 to 40°C),
80% Max Humidity
Power Supply
AC Input 100-240V, 50-60Hz,
Auto-Switching
Power Consumption
255 Watts (Bright), 233 Watts
(STD), <1 Watt (Standby)
Standard Accessories
AC Power Cord, VGA to VGA
Cable, Remote Control, Batteries
for Remote, USB Cable, Carrying
Case, Lens Cap, CD-ROM User’s
Manual, Quick Start Card and
Warranty Card
Optional Accessories
Wireless Dongle, Ceiling Mount,
HDMI Cable, VGA to Component
Cable, S-Video Cable,
Composite Video Cable, RS-232
Cable and Panoview™ Series
Screens
Warranty
Up to 3 Years Limited Parts and
Labor, Up to 1 Year on Lamp
UPC
796435 41 178 7
Accessory Part Numbers
Lamp: BL-FP180E
Remote: BR-5030L
Mount: BM-5001U
Case: BK-4028
Wireless Dongle: BI-EXTGB
Display Technology
Single 0.55” DMD DLP
®
Technology
by Texas Instruments
Resolution
Native XGA (1024 x 768)
Maximum Resolution
UXGA (1600 x 1200)
Brightness (Typical)
2800 ANSI Lumens
Contrast Ratio
3000:1 (Full On/Full Off)
Lamp Life and Type
5000/4000 Hours (STD/Bright)
180W P-VIP
Throw Ratio
1.6 to 1.92:1 (Distance/Width)
Projection Distance
3.93’ to 32.8’ (1.2 to 10m)
Image Size (Diagonal)
30” to 307” (0.92 to 9.21m)
Aspect Ratio
4:3 Native, 16:9 and 16:10
Compatible
Remote Control
Fully Featured IR Remote with
Mouse and Laser Pointer
Audio
Two 5-Watt Stereo Speakers
Displayable Colors
1.07 Billion
Offset
115%
Uniformity
85%
Keystone Correction
±40° Vertical
NO FILTER
REQUIRED
TX542-3D
− Multimedia Projector
Best in Class
Optoma’s TX542-3D is designed to meet the demanding requirements of school
districts and businesses. Bright, high contrast images provide easy-to-read text,
and the built-in closed captioning decoder displays text from videos that have
closed captioning embedded in the signal. Wired networking allows remote
management and control of the projector, and a built-in 10-watt speaker system
outputs volume required for larger audiences. Optoma backs the TX542-3D with
3 years of Express Replacement Service and a one year lamp warranty to provide
added peace of mind.
* 3D content can be viewed with active LCD shutter glasses when the projector is
connected to a computer with a compatible 3D graphics card. Please visit
www.optoma.com for more information.
Features
 Easy-to-read text – bright at 2800 ANSI lumens and high 3000:1 contrast ratio
 Broadcast messages to the projector over the network
 Eco-friendly low power consumption - sub-one watt standby mode
 Remote management and control via RS-232 or RJ45
 Protect your investment – built-in security bar, control panel lock, logo display
at start-up and user-selectable password
 Built-in closed captioning
Specifications
Datasheet – TX542-3D
* Lamp life is dependent upon many factors, including lamp mode, display mode, usage, environmental conditions and more. Lamp brightness can decrease over time.

Optoma TX542-3D Specifications

Display

display technology	Single 0.55” DMD DLP Technology
native resolution	1024 x 768
maximum resolution	1600 x 1200
brightness	2800 ANSI Lumens
contrast ratio	3000:1
displayable colors	1.07 Billion

Projection

throw ratio	1.6 to 1.92:1
projection distance	1.2 to 10 m
image size (diagonal)	0.92 to 9.21 m
keystone correction	±40° Vertical
projection lens	F= 2.4-2.66, f= 18.2-21.8mm, 1.2x Manual Zoom and Focus

Power

power supply	AC Input 100-240V, 50-60Hz, Auto-Switching
power consumption (bright)	255 Watts
power consumption (standard)	233 Watts
standby power consumption	<1 Watt

Audio and Noise

audio output	Two 5-Watt Stereo Speakers
noise level (standard)	29dB
noise level (bright)	31dB

Operating Environment

operating temperature	5 to 40°C
humidity (max)	80%

Weight and Dimensions

weight	2.9 kg
width	324 mm
height	97 mm
depth	234 mm

Summary

Product Features

Bright and High Contrast

Offers bright 2800 ANSI lumens and 3000:1 contrast ratio for clear, easy-to-read text.

Network Management

Allows remote management and control via RS-232 or RJ45, and broadcast messages over the network.

Energy Efficiency

Features eco-friendly low power consumption with sub-one watt standby mode.

Security Features

Includes security bar, control panel lock, and user-selectable password for investment protection.

Closed Captioning

Built-in closed captioning decoder displays text from videos with embedded closed captioning.

Product Specifications

Display Technology

Single 0.55" DMD DLP® Technology by Texas Instruments.

Resolution

Native XGA (1024 x 768), Maximum UXGA (1600 x 1200).

Brightness and Contrast

Typical 2800 ANSI Lumens brightness and 3000:1 contrast ratio.

Lamp Specifications

5000/4000 Hours (STD/Bright) lamp life, 180W P-VIP.

Projection Optics

Throw Ratio 1.6-1.92:1, Projection Distance 3.93'-32.8', Image Size 30"-307".

Compatibility Standards

Supports UXGA to VGA computer formats and NTSC/PAL/SECAM video standards.

3D Capabilities

Supports 120Hz Frame Sequential 3D up to 720p and 60Hz Field Sequential 3D up to 480i.

Connectivity and Audio

Features HDMI, VGA, S-Video, Composite, stereo audio, and 5W stereo speakers.

Physical and Environmental

Dimensions 12.76"x3.82"x9.21", noise 29/31dB, temp 41-104°F, 80% humidity.

Power and Consumption

AC Input 100-240V, 50-60Hz. Consumption: 255W (Bright), 233W (STD), <1W (Standby).

Included Accessories

Comes with AC power cord, VGA cable, remote, batteries, USB cable, carrying case.

Warranty Information

Up to 3 Years Limited Parts and Labor, Up to 1 Year on Lamp.