Need help?Do you have a question about the Optoma TX779P-3D and is the answer not in the manual?
General| Matrix size | 0.7 \ |
|---|---|
| Number of colors | 1.073 billion colors |
| Projection distance | 1 - 12 m |
| Projection technology | DLP |
| Contrast ratio (typical) | 3000:1 |
| Screen size compatibility | 23.4 - 300 \ |
| Projector native resolution | XGA (1024x768) |
| Keystone correction, vertical | -30 - 30 ° |
| Audio input | 1 |
| Dimensions (WxDxH) | 326 x 259 x 109 mm |
| Connectivity technology | Wired |
| Focus | Manual |
| Offset | 112 % |
| Throw ratio | 1.8 - 2.1:1 |
| Zoom capability | Yes |
| Focal length range | 26.9 - 29.8 mm |
| Lamp type | P-VIP |
| Lamp power | 300 W |
| Light source type | Lamp |
| Service life of light source | 2000 h |
| Service life of light source (economic mode) | 3000 h |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| CardBus PCMCIA slot type | No |
| VGA (D-Sub) ports quantity | 3 |
| CardBus PCMCIA slots quantity | 0 |
| Supported video modes | 1080i, 1080p, 480i, 480p, 720p |
| Analog signal format system | NTSC, PAL, SECAM |
| Supported graphics resolutions | 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1360 x 768 (WXGA), 1400 x 1050 (SXGA+), 1600 x 1200 (UXGA), 640 x 480 (VGA), 800 x 600 (SVGA) |
| RMS rated power | 3 W |
| Placement | Ceiling |
| Product color | Gray |
| Cable lock slot type | Kensington |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 380 W |
| Optical disc player type | Not included |
| Noise level | 30 dB |
| Noise level (economic mode) | 28 dB |
| Operating temperature (T-T) | 5 - 40 °C |
| Cables included | VGA |
| Remote control type | IR |
Weight and Dimensions| Depth | 259 mm |
|---|---|
| Width | 326 mm |
| Height | 109 mm |
| Weight | 3530 g |
To Next Page
