Optoma TX779P-3D Specifications

Superior Visual Performance for Demanding Applications
TX779P-3D
·Bright at 5000 ANSI lumens with high contrast ratio of 3000:1
(Full On/Off)
·Crestron RoomView® for projector management and control
via RJ45 connection
·Presentation-friendly IR remote with USB mouse function and
laser pointer
·Environment-friendly design – Consumes <1 Watt in standby
mode
·Built-in closed captioning
Key Features
The Optoma TX779P-3D DLP projector, exceptionally bright at 5000 lumens and 3D capable, provides outstanding
video and data display in large rooms and in rooms with high ambient light. Remotely monitor, manage and control the
Optoma TX779P-3D over the network via the integrated RJ45 Crestron RoomView® user-friendly interface. The
environmentally-friendly TX779P-3D incorporates energy-saving features including <1 watt standby mode, saving you
money.
Detail Specifications
Display Technology
Single 0.7” DC3 DLP
Technology by Texas
Instruments
Resolution
XGA (1024 x 768)
Maximum Resolution
UXGA (1600 x 1200)
Brightness
5000 ANSI Lumens
Contrast Ratio
3000:1 (Full On/Full Off)
Lamp Life and Type
3000/2000 Hours (STD/Bright)
300W P-VIP
Throw Ratio
1.8 to 2.1:1 (Distance/Width)
Projection Distance
3.28’ to 39.4’ (1.0 to 12m)
Image Size (Diagonal)
23.4” to 300” (0.59 to 7.62m)
Remote Control
IR Remote Mouse with Laser
Pointer
Keystone Correction
±30° Vertical
Displayable Colors
1.07 Billion
Offset
112%
Computer Compatibility
UXGA, WXGA, SXGA+, SXGA,
XGA, SVGA, VGA Resized,
VESA, PC and Macintosh
Compatible
Video File Compatibility
NTSC, PAL, SECAM, SDTV
(480i), EDTV (480p), HDTV
(720p, 1080i/p)
3D Compatibility
120Hz Frame Sequential 3D for
Resolutions Up to 720p, 60Hz
Field Sequential 3D for
Resolutions Up to 480i
Uniformity
85%
Projection Lens
F=2.6-2.81, f=26.9-29.8mm,
1.15x Manual Zoom and Focus
Monitor Loop Through
D-Sub 15-Pin VGA Output
(Functional in Both Normal and
Standby Modes)
User Controls
Complete On-Screen Menu
Adjustments in 23 Languages
I/O Connectors
HDMI, Two VGA-In, VGA-Out,
DVI-D, S-Video, Composite
Video, Stereo RCA Audio-In,
Stereo Audio-In, Stereo
Audio-Out, RS-232, USB, RJ45
and 12V trigger
Security
Kensington® Lock Port and
Keypad Lock
© Copyright 2011 Optoma Technology, Inc. All specifications subject to change at any time.
TX779P-3D - Datasheet

Optoma TX779P-3D Specifications

General

Matrix size	0.7 \
Number of colors	1.073 billion colors
Projection distance	1 - 12 m
Projection technology	DLP
Contrast ratio (typical)	3000:1
Screen size compatibility	23.4 - 300 \
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	-30 - 30 °
Audio input	1
Dimensions (WxDxH)	326 x 259 x 109 mm
Connectivity technology	Wired
Focus	Manual
Offset	112 %
Throw ratio	1.8 - 2.1:1
Zoom capability	Yes
Focal length range	26.9 - 29.8 mm
Lamp type	P-VIP
Lamp power	300 W
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
CardBus PCMCIA slot type	No
VGA (D-Sub) ports quantity	3
CardBus PCMCIA slots quantity	0
Supported video modes	1080i, 1080p, 480i, 480p, 720p
Analog signal format system	NTSC, PAL, SECAM
Supported graphics resolutions	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1360 x 768 (WXGA), 1400 x 1050 (SXGA+), 1600 x 1200 (UXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
RMS rated power	3 W
Placement	Ceiling
Product color	Gray
Cable lock slot type	Kensington
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	380 W
Optical disc player type	Not included
Noise level	30 dB
Noise level (economic mode)	28 dB
Operating temperature (T-T)	5 - 40 °C
Cables included	VGA
Remote control type	IR

Weight and Dimensions

Depth	259 mm
Width	326 mm
Height	109 mm
Weight	3530 g