Optoma UHD51A - Page 7

Setup Guide 06
Alexa Setup
Click Register to obtain the 4-digit pair code from the Mydevices Cloud. After the pair code is
generated, it will appear on the Show Pair Code field.
Note: If the pair code does not appear, please check if there is a proper network connection and repeat the above steps
again.
On the Optoma Mydevices webpage, enter the serial number, pair code, and choose a projector
alias (name) from the dropdown list. Then click Submit to register the projector.
On the Optoma Mydevices webpage, enter the serial number, pair code, and projector name on
its respective field. Then click Submit to register the projector.
Note: 1.The serial number and pair code information can be obtained from the Alexa Settings page.
2.The data of the "Alias" field can be changed later (if you desire).
Alexa Setup Guide