Need help?Do you have a question about the Optoma UHD35x and is the answer not in the manual?
General| Product color | White |
|---|---|
| Product type | Standard throw projector |
| Market positioning | Home cinema |
| Native aspect ratio | 16:9 |
| Projection distance | 1.21 - 9.9 m |
| Vertical scan range | 24 - 120 Hz |
| Horizontal scan range | 31 - 135 kHz |
| Projection technology | DLP |
| Supported aspect ratios | 3:4, 16:9 |
| Contrast ratio (typical) | 1000000:1 |
| Screen size compatibility | 33 - 300 \ |
| Projector native resolution | 2160p (3840x2160) |
| Keystone correction, horizontal | -40 - 40 ° |
| RMS rated power | 10 W |
| Number of built-in speakers | 1 |
| Built-in display | No |
| Lamp power | 240 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 4000 h |
| Service life of light source (economic mode) | 10000 h |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 305 W |
| Power consumption (standby) | 0.5 W |
| Offset | 105 % |
| Focal length range | 15.84 - 17.42 mm |
| Supported 3D formats | Frame packing |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2160p |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Operating altitude | 0 - 3000 m |
| Operating temperature (T-T) | 5 - 40 °C |
| Operating relative humidity (H-H) | 10 - 85 % |
| Noise level | 28 dB |
| Number of OSD languages | 10 |
| Noise level (economic mode) | 26 dB |
| On Screen Display (OSD) languages | CHI (SIMPL), DEU, ENG, ESP, FRE, ITA, JPN, POR, RUS |
Weight and Dimensions| Depth | 270 mm |
|---|---|
| Width | 315 mm |
| Height | 118 mm |
| Weight | 3980 g |
Essential instructions for safe operation, lamp handling, and general precautions.
Guidance on different projector mounting positions and placement.
Instructions for connecting various sources like computers and media players.
Detailed steps for turning the projector on, initial setup, and powering it off.
How to choose and switch between different connected video and audio sources.
Navigating the On-Screen Display menu to adjust image, display, audio, and system settings.
Detailed hierarchy of the OSD menu, listing all available settings and options.
Adjusting picture modes, color, brightness, contrast, sharpness, and aspect ratio.
Step-by-step instructions for safely replacing the projector's light bulb.
Solutions for common problems like no image, out of focus, or image distortion.
Detailed technical specifications including optical, I/O, power, and environmental data.
To Next Page
