Optoma UHD35x - Info Menu

English
41
USING THE PROJECTOR
Information Hide
Enable this function to hide the information message.
 O󰀨: Choose “O󰀨” to show the “searching” message.
 On: Choose “On” to hide the info message.
Logo
Use this function to set the desired startup screen. If changes are made, they will take e󰀨ect the next time the
projector is powered on.
 Default: The default startup screen.
 Neutral: Logo is not displayed on startup screen.
Background Color
Use this function to display a blue, red, green, gray color, or none when no signal is available.
Reset menu
Reset OSD
Return the factory default settings for OSD menu settings.
Reset to Default
Return the factory default settings for all settings.
Info menu
View the projector information as listed below:
 Regulatory
 Serial Number
 MAC Address
 Source
 Resolution
 Refresh Rate
 Display Mode
 Lamp Hours
 Projector ID
 Filter Usage Hours
 Brightness Mode
 FW Version