Need help?Do you have a question about the Optoma UHD42 and is the answer not in the manual?
General| Native aspect ratio | 16:9 |
|---|---|
| Projection distance | 1.2 - 8.1 m |
| Vertical scan range | 24 - 120 Hz |
| Horizontal scan range | 31 - 135 kHz |
| Projection technology | DLP |
| Supported aspect ratios | 4:3, 16:9 |
| Contrast ratio (typical) | 500000:1 |
| Screen size compatibility | 34.1 - 302.4 \ |
| Projector native resolution | 2160p (3840x2160) |
| Keystone correction, vertical | -40 - 40 ° |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 4000 h |
| Service life of light source (economic mode) | 10000 h |
| Focus | - |
| Offset | 105 % |
| Throw ratio | 1.21:1 - 1.59:1 |
| Zoom capability | Yes |
| Focal length range | 12.81 - 16.74 mm |
| Vertical lens shift range | 0 - 10 % |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Supported graphics resolutions | 640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1360 x 768 (WXGA), 1600 x 1200 (UXGA), 1920 x 1080 (HD 1080), 2560 x 1600 (WQXGA) |
| DVI port | No |
| HDMI version | 1.4a/2.0 |
| HDMI connector type | Full-size |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Component video (YPbPr/YCbCr) in | 0 |
| Noise level | 26 dB |
| Number of OSD languages | 10 |
| On Screen Display (OSD) languages | CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, POR, RUS |
| RMS rated power | 10 W |
| Placement | Desktop |
| Product type | Standard throw projector |
| Product color | White |
| Market positioning | Gaming |
| Cable lock slot type | Kensington |
| Power source | AC |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 305 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (economy mode) | 220 W |
| Operating altitude | 0 - 3000 m |
| Operating temperature (T-T) | 5 - 40 °C |
| Operating relative humidity (H-H) | 0 - 85 % |
| Remote control type | IR |
| Harmonized System (HS) code | 85286200 |
Weight and Dimensions| Depth | 270 mm |
|---|---|
| Width | 315 mm |
| Height | 118 mm |
| Weight | 3900 g |
Key safety guidelines for projector operation and longevity.
Warnings regarding voltage, heat, ventilation, and environmental hazards.
Detailed guide to the projector's input and output connectors.
Comprehensive guide to operating the projector using the remote control.
Guidance on selecting the optimal placement and mounting for the projector.
Instructions for connecting various sources to the projector via different cables.
Steps for adjusting the projected image's height, size, position, and clarity.
Steps to power on the projector and perform initial configuration.
Correct procedure for shutting down the projector and its cooling cycle.
Guide to operating the projector's OSD menus for settings and adjustments.
Detailed descriptions of 'Display Mode' presets and 'Wall Color' adjustments.
Important safety guidelines and warnings before replacing the projector lamp.
Step-by-step guide for safely replacing the projector lamp module.
Instructions for installing and cleaning the projector's dust filter.
Solutions for common issues like no image, focus, and distortion.
Solutions for projector unresponsiveness and remote control malfunctions.
Comprehensive list of optical, electrical, and mechanical specifications.
To Next Page
