Optoma UHD42 User Manual

English
33
USING THE PROJECTOR
Enhanced gaming menu
Enable this feature to reduce response times (input latency) during gaming to 15.7ms*.
Note:
 *Only for 1080p 240Hz signals.
 The input lag by signals is described in the following table:
 The values in the table can vary slightly.
4K 60Hz 1440P 60Hz 1080P 60Hz 1080P 120Hz 1080P 240Hz
25.8ms 25.8ms 23.8ms 18.2ms 15.7ms
3D menu
3D Mode
Use this option to enable/disable the 3D mode function.
3D Sync Invert
Use this option to enable/disable the 3D sync invert function.
3D Format
Use this option to select the appropriate 3D format content.
 Auto: When a 3D identication signal is detected, the 3D format is selected automatically.
 SBS: Display 3D signal in “Side-by-Side” format.
 Top and Bottom: Display 3D signal in “Top and Bottom” format.
 Frame Sequential: Display 3D signal in “Frame Sequential” format.
 Frame Packing: Display 3D signal in “Frame Packing” format.
3D-2D
Use this option to specify how the 3D content should appear on the screen.
 3D: Display 3D signal.
 L (Left): Display the left frame of 3D content.
 R (Right): Display the right frame of 3D content.
Aspect ratio menu
Select the aspect ratio of the displayed image between the following options:
 4:3: This format is for 4:3 input sources.
 16:9: This format is for 16:9 input sources, like HDTV and DVD enhanced for Wide screen TV.
 LBX: This format is for non-16x9, letterbox source and if you use external 16x9 lens to display 2.35:1
aspect ratio in full resolution.
 Superwide: Use this special 2.0:1 aspect ratio to display both 16:9 and 2.35:1 aspect ratio movies
without black bars at the top and bottom of the screen.
 Native: This format displays the original image without any scaling.
 Auto: Automatically selects the appropriate display format.

Optoma UHD42 Specifications

General

Native aspect ratio	16:9
Projection distance	1.2 - 8.1 m
Vertical scan range	24 - 120 Hz
Horizontal scan range	31 - 135 kHz
Projection technology	DLP
Supported aspect ratios	4:3, 16:9
Contrast ratio (typical)	500000:1
Screen size compatibility	34.1 - 302.4 \
Projector native resolution	2160p (3840x2160)
Keystone correction, vertical	-40 - 40 °
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	4000 h
Service life of light source (economic mode)	10000 h
Focus	-
Offset	105 %
Throw ratio	1.21:1 - 1.59:1
Zoom capability	Yes
Focal length range	12.81 - 16.74 mm
Vertical lens shift range	0 - 10 %
Supported video modes	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Supported graphics resolutions	640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1360 x 768 (WXGA), 1600 x 1200 (UXGA), 1920 x 1080 (HD 1080), 2560 x 1600 (WQXGA)
DVI port	No
HDMI version	1.4a/2.0
HDMI connector type	Full-size
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	0
Noise level	26 dB
Number of OSD languages	10
On Screen Display (OSD) languages	CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, POR, RUS
RMS rated power	10 W
Placement	Desktop
Product type	Standard throw projector
Product color	White
Market positioning	Gaming
Cable lock slot type	Kensington
Power source	AC
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	305 W
Power consumption (standby)	0.5 W
Power consumption (economy mode)	220 W
Operating altitude	0 - 3000 m
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	0 - 85 %
Remote control type	IR
Harmonized System (HS) code	85286200

Weight and Dimensions

Depth	270 mm
Width	315 mm
Height	118 mm
Weight	3900 g