4
III.
II.
I.
-If the Multibay Charger is not in use, store it in a dry and
dust-free place the six plugs in the appropriate round
sockets to protect them from dust.
-Place the Multibay Charger on stable and clean surface.
Insert the batteries into the battery slots. Make sure that
no cable is pinched by the batteries and all batteries are
inserted properly in their slots.
- Remove the protective cover from the battery.
-Insert the plug in the cable connection of the battery.
Repeat this step for each battery
-Stellen Sie sicher, dass der OFF/ON Schalter, an der
Stirnseite des Multiladegerätes, auf OFF steht.
-Stecken Sie das Netzkabel unterhalb des OFF/ON
Schalters bis zum Anschlag ein.
-Drücken Sie den OFF/ON Schalter auf ON.
OFF/On
To Next Page
Loading...