If the process interface of the camera is directly connected to external hardware
1)
(without using the
supplied PIF cable) an activation of the field „Support proprietary PIF cable” in the menu
Tools/ Configuration/ Device (PIF) in the PIConnect software is necessary.
Figure 18: Support proprietary PIF cable
1)
We recommend using only a switching contact between INT and DGND as external hardware (button, relay).
4.1.2 Industrial Process Interface (optional)
For use in industrial environment the industrial process interface with 500 VAC
RMS isolation voltage
between PI and process is available (connection box with IP65, 5 m, 10 m or 20 m standard or high
temperature cable for camera connection, terminal for process integration).
[►Appendix F – Wiring
diagrams PIF]
To Next Page
Loading...