4
Setting Up Your Phone
The nano-SIM card can be installed or removed while
the phone is turned on.
Power off your phone before removing or replacing
the battery.
WARNING!
To avoid damage to the phone, do not use any other kind
of SIM cards, or any non-standard nano-SIM card cut from
a SIM card. You can get a standard nano-SIM card from
your service provider.
1. Place your inger in the slot at the bottom of the
back cover, and gently lift and remove the cover.
2. Install the nano-SIM card and the optional microSDXC
card as shown.
To Next Page
Loading...
