Oracle ALEXANDRIA MK III User Manual

WHAT DO TO IF….
IF THE TURNTABLE DOES NOT START AND THE SPEED INDICATING LIGHT DOES NOT GO ON.
- Check AC connection to the wall outlet
- Power supply output plug to the input receptacle of the turntable
- Power supply output , if no output, replace the fuse inside.
IF THE TURNTABLE DOES NOT START AND THE SPEED INDICATING LIGHT GOES ON
- Check the drive belt
- Motor connection plug for a broken wire
- Drive module for a broken wire
- Defective drive module
IF THE PLATTER IS NOT PARALLEL WITH THE PLINTH
- Check the suspension calibration using the suspension gauge
- Note: if a relatively important change occurred in one particular suspension module, this
could be the sign of an improperly seated spring or sorbothane ring, analyze each part
carefully prior to calibrating the supsenion
- Read: section How to….assess the suspension calibration
- Read: section How to….calibrate the suspension
IF AN EVEN UP OR DOWN MOTION CANNOT BE OBTAINED WHEN GENTLY PRESSING ON THE
RECORD CLAMP.
- Check leveling of the base
- For the phono lead interference with the movement of the suspension. If uncertain, unplug
the lead.
- Previous topic: …do if the platter is not parallel with the plinth.
ALEXANDRIA MK III
Owner’s manual

Oracle ALEXANDRIA MK III Specifications

General

Brand	Oracle
Model	ALEXANDRIA MK III
Category	Turntable
Language	English