Supported Components and Capabilities
12 Oracle Database Appliance Owner's Guide • March 2017
Oracle Database Appliance X6-2 Series
Components and Capabilities
The following table lists supported components and capabilities for the Oracle Database
Appliance X6-2 series systems.
Component Oracle Database Appliance
X6-2S
Oracle Database Appliance
X6-2M
Oracle Database Appliance
X6-2L
Oracle Database Appliance
X6-2-HA
Server node Single 1RU server. Single 1RU server. Single 2RU server. Two 1RU server nodes.
Each server node operates
independently from the
other server node. The lower
server node is node 0 (SN0).
The upper server node is
node 1 (SN1).
CPUs One 10-core 2.2 GHz Intel
Xeon E5-2630 V4 processor.
Two 10-core 2.2 GHz
Intel Xeon E5-2630 V4
processors.
Two 10-core 2.2 GHz
Intel Xeon E5-2630 V4
processors.
Two 10-core 2.2 GHz
Intel Xeon E5-2630 V4
processors per server node.
Memory 128 GB – four 32 GB low-
voltage DDR4 RDIMMs
rated at 2400 MT/s (2133
MT/s actual maximum).
Note - Optional memory
expansion to 384 GB. See
“Optional Component
Installation” on page 58.
256 GB – eight 32 GB low-
voltage DDR4 RDIMMs
rated at 2400 MT/s (2133
MT/s actual maximum).
Note - Optional memory
expansion to 512
GB or 768 GB. See
“Optional Component
Installation” on page 58.
256 GB – eight 32 GB low-
voltage DDR4 RDIMMs
rated at 2400 MT/s (2133
MT/s actual maximum).
Note - Optional memory
expansion to 512
GB or 768 GB. See
“Optional Component
Installation” on page 58.
256 GB – eight 32 GB low-
voltage DDR4 RDIMMs
rated at 2400 MT/s per
server node (2133 MT/s
actual maximum).
Note - Optional memory
expansion to 512 GB or
768 GB per server. Both
server nodes must have the
same amount of memory.
See “Optional Component
Installation” on page 58.
Storage
devices
The server includes:
■ Two 2.5-inch 480 GB
SATA SSDs in slots
HDD 0-1 reserved for
operating system storage
and system booting
■ Two 2.5-inch 3.2 TB
NVMe SSDs in slots
NVMe 0-1
Note - Two optional NVMe
SSDs can be added. See
The server includes:
■ Two 2.5-inch 480 GB
SATA SSDs in slots
HDD 0-1 reserved for
operating system storage
and system booting
■ Two 2.5-inch 3.2 TB
NVMe SSDs in slots
NVMe 0-1
Note - Two optional NVMe
SSDs can be added. See
The server includes:
■ Six 2.5-inch 3.2 TB
NVMe SSDs in front
slots 0, 1, 3, 4, 6, 7
Note - Three optional
NVMe SSDs can
be added. See
“Optional Component
Installation” on page 58.
■ Two 2.5-inch 480 GB
SATA SSDs in rear
Each server node includes:
■ Two 2.5-inch 480 GB
SATA SSDs in slots 0-1
reserved for operating
system storage and
system booting
The 4RU storage shelf
and the optional storage
expansion shelf each
include:
To Next Page
Loading...
Need help?
General