Oracle SUN Fire X4640 - Interpreting Event Log Time Stamps

A conrmation dialog appears.
Click OK to clear the entries.
▼
How to Clear Faults From the System Event Log Using the ILOM
Command-Line Interface
Type the following command:
cd /SP/logs/event/
set clear=true
A conrmation message appears.
Type one of the following:
■
To clear the entries, type: y
■
To cancel clearing the log, type: n
Interpreting Event Log Time Stamps
The time stamps in the event log are related to the service processor clock settings. If the clock
settings change, the change is reected in the time stamps.
When the service processor reboots, the SP clock is set to Thu Jan 1 00:00:00 UTC 1970.
The SP reboots as a result of the following:
■
A complete system unplug/replug power cycle
■
An IPMI command; for example, mc reset cold
■
A command-line interface (CLI) command; for example, reset /SP
■
ILOM web interface operation; for example, from the Maintenance tab, selecting Reset SP
■
An SP rmware upgrade
3
1
2
Interpreting Event LogTime Stamps
31