Orange Pi Zero - Ubuntu Core Usage Examples

Shenzhen Xunlong Software Co., Limited
10
Login console with system configure
The configure interface at the first time booting named console-conf , it would logout
after configured. It would run with getty and provide login interface. If you donot want
to use ssh, you could configure console to login the system.
You could set the password after login system with ssh.
Back the the terminal of serial port and press Enter to logout console-conf, and you will
enter into the following prompt of console. You could login with your account and
password into Ubuntu Core.
4．Using example of Ubuntu Core
You could run Ubuntu Core after finished the previous configuration.
1.
$ sudo passwd ${USER}