Shenzhen Xunlong Software Co., Limited
12
Since there is not enough relevant driver, we have set those two functions on edge
channel, you could run them with the following command:
Reflash orangepi-zero-kernel on edge channel, and reboot the system. You could
use WIFI and AV video output.
WIFI configuration just like the following shows, account and password both are
Add WIFI configuration on /etc/netplan/00-snapd-config.yaml and reboot it.
Orange Pi has already has its exclusive store, you could use Web page or command to
upload your Snaps to Orange Pi store.
$ sudo snap refresh orangepi-zero-kernel --edge