Need help?Do you have a question about the ORANGE CR120H and is the answer not in the manual?
General| Power Output | 120W |
|---|---|
| Speaker Configuration | N/A (Head Only) |
| Channels | 2 (Clean and Dirty) |
| Effects Loop | Yes |
| Effects | Reverb |
| EQ | 3-band EQ |
| Inputs | 1 x 1/4" Instrument Input |
| Outputs | 2 x 1/4" Speaker Outputs, Balanced Line Output |
Plug your instrument into this jack socket.
Controls the volume of the clean channel.
Controls the bass response of the clean channel.
Controls the treble response of the clean channel.
Controls the volume to the dirty channel.
Controls the bass response of the dirty channel.
Controls the midrange response of the dirty channel.
Controls the treble response of the dirty channel.
Controls the output volume of the dirty channel.
Switches which reverb effect is used (Spring, Hall, Plate).
Controls the level of the reverb.
Controls the overall output volume.
Toggles between the clean and dirty channel.
Turns on the mains power to the amplifier.
Connect speaker cabinets (16 Ohm, 16 Ohm).
Use a footswitch to change channels.
Use a footswitch to switch reverb on/off.
Connect effects pedals or rack equipment.
To Next Page