System settings
23
6 CHANNEL TRANSMITTER
DIGITAL PROPORTIONAL RADIO
CONTROL SYSTEMPROGRAMABLE SYSTEM
Firmware Ver.
This function shows information about the transmitters currently installed firmware version.
Firmware update
The function is for updating the system firmware.
Setup:
1. Download the latest firmware from www.hobbyking.com
2. Open the firmware update on a computer and connect the system via USB cable.
3. Select [Firmware Update] from the systems function menu. Press the wheel, the system will
show a prompt, “This will enter firmware update mode and halt other functions” with an option to
continue, select “Yes”.
*When in update mode the system will show a prompt, “Update mode active. Turn the system off
and on again to exit”.
4. Once the system has been recognized by the computer select the update button.
*Once the system has been updated it will restart.
*Once the system has restarted it is safe to remove the USB cable.
RF module ver.
This function shows information about the receivers currently installed RF module version.
To Next Page
Loading...