Orava ACC-20 - User Manual

Questions and Answers

A
Andrew DavisAug 11, 2025
Why my Orava ACC-20 Air Conditioner does not work?
- K
  Kevin HartmanAug 11, 2025
  If your Orava Air Conditioner isn't working, first ensure it's properly connected to the mains and turned on. Check if the 'Full' indicator is lit, and if so, drain the water. The unit operates best between 5 and 35°C, so verify the ambient temperature is within this range. If cooling, ensure the set temperature is higher than the room temperature. Direct sunlight can affect performance, so tighten the curtains. In cooling mode, close doors and windows to isolate the room and eliminate heat sources. Also, inspect and clean or replace dirty filter nets and clear any obstructions from the air intake or outlet. Ensure the unit is placed on a flat, solid surface. Finally, if overload protection has activated, wait 3 minutes before restarting.
S
Steven Anthony DVMAug 21, 2025
How to improve cooling on my Orava ACC-20?
- D
  Daniel WilliamsAug 21, 2025
  If your Orava Air Conditioner isn't cooling effectively, try these steps: First, ensure the set temperature is lower than the current room temperature. Direct sunlight can impact cooling, so close the curtains. Make sure doors and windows are closed to keep the room isolated, and remove any extra heat sources. Check and clean or replace the filter nets if they're dirty. Verify that the air intake and outlet aren't blocked by any obstacles. For optimal performance and to reduce noise, place the air conditioner on a flat, solid surface.
C
Charles ColeAug 30, 2025
How to reduce noise from my Orava ACC-20?
- A
  Anna CooperAug 30, 2025
  If your Orava Air Conditioner is producing excessive noise, make sure that it is placed on a flat and solid surface. This can help reduce the noise level.

Orava ACC-20 Specifications

General

Brand	Orava
Model	ACC-20
Category	Air Conditioner
Language	English

Orava ACC-20 - User Manual

Table of Contents

Questions and Answers

Orava ACC-20 Specifications