20
EN
Assembly and installation of the device
Before using the device, it requires a correct and complete installation
and engagement. If you do not dare install the device yourself, contact an
experienced person from your neighborhood.
Installation
Caution!
Leave this mobile air conditioner in the standing position for at least 2 hours
before using it for the first time.
This air-conditioning unit can conveniently be moved indoors in a standing
(upright) position when moving.
The air conditioning must be placed on a flat surface.
Do not install or operate this air conditioner in a bathroom or other humid
environment.
Mounting the hot blower hose with the hot blower hose coupling to the
assembly
fig. 1 fig. 2
1 Unfold the hot blow air hose and the hot blower hose coupling from the
plastic (Figure 1). The hose can be stretched and the clutch is two-part.
2 Secure the two coupling parts against the projections towards the grooves
and press the pieces so they click into place. Then, counterclockwise, slide
the hot blowing air hose onto the hot air blower hose assembly to form the
assembly as in figure 2.
Note: The hot blow air hose must be screwed on at least 3 threads on the hot
blower hose connector
To Next Page
Loading...