19
EN
1. Control panel
2. Horizontal laminations
3. Vertical laminations (behind horizontal)
4. Exhaust air grille
5. Vertical lamination control switch
6. Wheels
7. Rotating horizontal lamination
8. Rotating control element of vertical
laminations
9. Front cover
10. Handle (store the remote control in the
back of the interior)
11. Rear cover
12. C clasp for a hot blowing hose
13. Power cord
14. Blowing air circular opening
15 Hooks for power cord
16. Outlet cover
17. Evaporator filter grille
18. Evaporator filter drawer frame
19. Grid
20. Filter capacitor grid
21. Condenser filter outlet frame
22. Base (bottom of device)
23. Remote control
24. Coupling of a hot blowing hose
(two-piece)
25. Hose of hot, blowing air
26. Window sealing panel assembly
for connecting a hot blow air hose to
sliding windows
Part description
Carefully remove the device from the packaging material.
Remove any residual packaging material on the device.
Make sure you have all the accessories listed.
If necessary, install 4 transport wheels.
To Next Page
Loading...