16
EN
3 Press the button . or > (5, 13) on the remote control or turn the TUNING/SKIP
control (8) on the unit to set the clock.
Press the CLK/MEM button (4) to confirm the setting.
4 Press the button . or > (5, 13) on the remote control or turn the TUNING/SKIP
control (8) on the unit to set the minutes.
Press the CLK/MEM button (4) to confirm the setting.
The time setting mode turns off and the clock is running.
Alarm settings
1 Press and hold 1 STANDBY (1) on the remote control or press VOLUME +/- (STANDBY)
(2) on the unit to switch off the unit to standby mode.
2 In standby mode, press and hold the TIMER/SLEEP button (2) on the remote control
or the TUNING/SKIP (TIMER/SLEEP) control (8) on the unit to activate the alarm time
setting mode and activate it. “ON TIME” appears on the display. So you will set the time to
turn on the device.
In this setting mode, then briefly press TIMER/SLEEP to switch the setting items in the
order Hours - Minutes.
The currently selected item flashes.
3 When the alarm clock setting is selected, press the button . or > (5, 13) on the
remote control or set the alarm clock by turning the TUNING/SKIP knob (8) on the unit.
Press TIMER/SLEEP to confirm the setting.
4 Press the button . or > (5, 13) on the remote control or turn the TUNING/SKIP
control (8) on the unit to set the alarm minutes.
Press TIMER/SLEEP to confirm the setting.
“OFF TIME” appears on the display. You will then set the time for the device to switch off.
Set the time exactly as described for setting the “ON TIME”.
5 After setting the “OFF TIME”, press the button . or > (5, 13) on the remote control
or turn the TUNING/SKIP knob (8) on the device to set the alarm sound source (“CD” will
flash first, you can also select USB, radio (TUNER) or buzzer (BUZZER)) . After setting
the sound source, adjust the alarm volume to “VOLUME”.
Press TIMER/SLEEP to confirm the setting.
The time setting mode is switched off and the alarm is activated. After successful setting,
the alarm symbol will appear on the LCD display.
When the set alarm time comes, the sound from the CD (CD must be inserted), USB
(USB drive must be connected), FM radio, or buzzer sound will sound, depending on what
you have set as the alarm source.
6 When the alarm sounds, you can turn it off with the button on the remote control 1
STANDBY (1) or the STANDBY button (2) on the unit.
Otherwise, the alarm will turn off at the set OFF TIME.
7 To deactivate the alarm, press TIMER/SLEEP on the remote control or device until the
alarm symbol disappears from the display
To Next Page
Loading...