Orava RR-71 - Maintenance

24
EN
Notes
• In order to use the BLUETOOTH function, the connected BLUETOOTH device must have
the same profile as this system.
• Even if the profiles are the same, the devices may work differently depending on their
specifications.
• Due to the characteristics of wireless BLUETOOTH technology, the sound reproduced by
this system is slightly delayed compared to the sound from the BLUETOOTH playback
device during a telephone call or listening to music.
• This system supports security standards that comply with BLUETOOTH standards to
ensure a secure connection when using BLUETOOTH wireless technology. However,
depending on your settings, security may not be enough. Be careful when communicating
using BLUETOOTH wireless technology.
• We are not responsible for information leakage during BLUETOOTH communication.
• A device with BLUETOOTH function is required to ensure compliance with BLUETOOTH
standards specified by the Bluetooth SIG standard and authentication. Even if the
connected device complies with the above BLUETOOTH standards, some devices may
not be able to be connected or may not work properly depending on the functions or
technical specifications of the device.
• Depending on the BLUETOOTH device connected to this system, the communication
environment, or the operating environment, noise or sound dropouts may occur.
Maintenance
Use a soft cloth slightly moistened with a mild cleaning solution to clean the surface, panel,
and controls. Do not use any type of abrasive pad, scouring powder, or solvent, such as
thinner, petrol, or alcohol.
CD cleaning
• Before playing, clean the disc with a cleaning cloth. Clean the disc from the center to the
edges.
• Do not use solvents such as petrol, thinner, commercially available cleaners, or antistatic
spray intended for vinyl LPs.
Laser lens cleaning
Use a commercially available camera lens cleaner to clean the laser lens. Check with your
dealer.