20
EN
MP3 playback
The player allows you to play MP3 format in audio quality comparable to a CD. You can play
up to 600 minutes of music or 150 songs on one disc.
You can play MP3 files as well as tracks on a CD.
1 Press 1 STANDBY (1 on the remote control or press VOLUME +/- (STANDBY) (2) Turn
on the device on the device.
2 Open the large disc cover on the unit (top).
3 Briefly press the FUNC (10) button on the remote control or the FUNCTION (6) button on
the device to select the CD audio source.
4 The CD display lights up.
5 Lift open the small disc cover and place the disc on the tray (label side up).
6 Close the disc cover. The CD player reads the disc and playback starts automatically and
the MP3 CD appears on the display.
7 If playback does not start automatically, press u (play/pause) on the remote control or
device to start playback.
8 Turn VOLUME +/- (2) on the unit or press VOLUME + and - (7, 14) adjust the volume on
the remote control.
9 To pause playback, press u (play/pause) on the remote control or device.
To resume playback, press the button again.
10 To stop playback, press x (stop) on the remote control or device.
11 By pressing the button .(Rewind) /> (Fast forward) on the remote or turn the
TUNING/SKIP control on the unit to skip to the previous/next track.
Switch albums/folders
Press v or V (9, 8) on the remote control or v / V (6) on the unit to switch to the previous or
next folder.
Switch play modes
Pressing the CLK/MEM button (4) on the remote control or on the unit (6) during playback
switches the playback mode in the following order:
1 (current) track is played repeatedly - the current folder is played repeatedly - the
entire disc is played repeatedly - the tracks on the disc are played in random order -
Normal play