EasyManua.ls Logo

Orava RR-71 - Page 6

Orava RR-71
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
EN
Inspection/Commissioning
We recommend performing initial and subsequent regular inspections of the device.
Never use the device if it is incomplete, damaged or any part of it has been damaged
during use.
Do not use non-original and incomplete parts of the device and its accessories. Danger
of serious injuries!
There is a risk of damage to the device or other property damage!
If the device has been transported and stored at low temperatures (e.g. in winter) or
excessive humidity, first leave it for about 1 - 2 hours
„Acclimatize“ at room temperature to remove any moisture in the electrical / electronic
components that occurs when the ambient temperature changes.
Do not turn the device on or off by plugging or unplugging the power cord.
In normal use, always connect the device to the mains first and then switch it on with
the main switch.
After use, turn off the device with the main power switch, and then unplug the power
cord from the AC socket.
Do not use the device if the main power switch does not work on the device.
The device is under dangerous voltage when the mains supply is connected.
There is a risk of electric shock!
Location/Installation
Only place the device on:
- flat, firm and stable supports - for tables and coffee tables and on furniture parts sui-
table for placing audio / video equipment.
Always make sure that the place where you want to place the device has sufficient
space, mechanical strength and load-bearing capacity.
Do not install the device in areas (e.g., closed bookcases, built-in cabinets and cabi-
nets, etc.) where there is insufficient space and ventilation.
Leave enough free space around the device to ensure the required air circulation. It is
recommended to leave min. 10 cm on all sides.
Do not partially cover the device. Do not place any objects and / or decorative and other
fabrics on the device, do not insert or allow foreign bodies to enter the ventilation ope-
nings and the openings of the device covers.
Do not cover the air vents of the covers. Air ventilation ensures reliable and safe opera-
tion of the device.
There is a risk of electric shock!
There is a risk of fire!
Warning!
Do not expose the audio device (and the remote control, if equipped) to:
- direct sunlight, heat-producing devices,
- vibration and mechanical stress,
- excessive dust,
- water and excessive humidity,
- insects,
- an aggressive external environment.
Do not place the audio device (and the remote control, if equipped):
- to places where medical devices are used. Their function may be impaired;
- on unstable carts, stands or tables;
- on uneven, unstable and dirty surfaces;
- on the tight edge of tables, tables or parts of furniture;
- near containers with water or other liquids.
Do not place containers of water or other liquids on the shelves that are located above
the device.
Do not place any objects, especially open flames, on the device or on shelves that are
located above the device.

Related product manuals