Orbea alma - Torque Specifications; Checking and Adjusting Torque

TECHNICAL SPECIFICATIONS
15
TORQUE SPECS
ALMA TORQUE SPECIFICATIONS
Fastener Required tools Torque Note
1 4 mm hex 5 Nm
2 4 mm hex 3 Nm
3 5 mm hex 10 Nm
Minimum bolt insertion
8 mm
4 3 mm hex 4 Nm
CHECKING AND ADJUSTING TORQUE
Bolt tightening torques should be checked frequently,
specially if any kind of malfunctioning, noise, play or
vibration is detected in the bike.
4
4
4
1
3
2
3 4