Orbegozo FDI 123 - User Manual

Questions and Answers

E
Emily AndersonAug 9, 2025
Why is my Orbegozo Air Conditioner not cooling properly?
- S
  Scott RodriguezAug 9, 2025
  If your Orbegozo Air Conditioner isn't cooling well, a few things could be the reason. Check if the temperature setting is higher than the room temperature and lower it. A dirty heat exchanger on either the indoor or outdoor unit can also cause this, so clean the heat exchanger. Also, the air filter might be dirty, so remove and clean it as per the instructions. Ensure that doors and windows are closed while operating the unit. Turn off SILENCE function, if activated.
S
Stephen FletcherAug 20, 2025
What to do if Orbegozo Air Conditioner cools poorly?
- C
  Carlos SparksAug 20, 2025
  If your Orbegozo Air Conditioner is not cooling effectively, start by ensuring that all doors and windows are closed to prevent heat from entering. Next, check for any obstructions blocking the air inlet or outlet of either the indoor or outdoor unit; if there are any, turn off the unit, remove the obstruction, and then turn it back on. Additionally, reduce the number of heat sources in the room, such as computers or electronics. Also, ensure that the temperature setting is appropriately low.
S
stephensmichelleAug 29, 2025
How to improve cooling performance of Orbegozo Air Conditioner?
- N
  Nancy DavisAug 30, 2025
  If your Orbegozo Air Conditioner isn't cooling as expected, it might be due to several factors: * The air filter could be dirty; clean it following the instructions. * Sunlight might be generating excessive heat; close windows and curtains. * There could be low refrigerant due to a leak or long-term use; check for leaks, reseal if necessary, and top off the refrigerant.

Summary

Safety Precautions

Product Use and Handling Warnings

Covers safety warnings for using the appliance, including potential hazards and proper handling procedures.

Installation and Electrical Safety

Ensures safe installation practices, electrical connections, and handling of refrigerants.

Refrigerant and Disposal Precautions

Details safety guidelines for refrigerants and environmentally sound disposal of the appliance.

Unit Specifications and Features

Indoor Unit Display and Operating Temperatures

Explains the indoor unit display indicators and operational temperature ranges for different modes.

Other Unit Features

Describes additional functionalities like Auto-Restart, Anti-mildew, Wireless Control, and Louver Memory.

Airflow Control and Manual Operation

Guides on setting airflow angles and operating the unit without the remote control.

Care and Maintenance

Cleaning Procedures for Unit and Filters

Provides step-by-step instructions for cleaning the indoor unit and its air filters.

Maintenance Reminders and Storage

Covers air filter reminders, long-term non-use maintenance, and pre-season checks.

Troubleshooting Guide

Common Issues and Performance Problems

Details common problems such as poor cooling, unit not working, and noises.

Unit Not Working and Heating Issues

Addresses troubleshooting for unit failure, frequent stops, and poor heating performance.

Installation Manual

Indoor Unit Installation Steps

Step-by-step instructions for selecting location, mounting, and connecting the indoor unit.

Outdoor Unit Installation Steps

Detailed steps for selecting location, anchoring, and connecting the outdoor unit.

Refrigerant Piping and Evacuation

Instructions for connecting refrigerant pipes, removing burrs, flaring, and system evacuation.

Electrical Checks, Leak Checks, and Test Run

Guidance on electrical safety, gas leak detection, and performing a final test run.

Impedance Information

Model-Specific Impedance Requirements

Details the maximum allowable system impedance for specific appliance models.

Orbegozo FDI 123 Specifications

General

Type	Split
Refrigerant	R32
Energy Efficiency Cooling	A++
Energy Efficiency Heating	A+
SEER	6.1
SCOP	4.0
Air Flow	500 m³/h
Cooling Capacity	3500 W
Power Supply	220-240 V, 50 Hz