
Do you have a question about the Orbit 57881 and is the answer not in the manual?
| Number of Outlets | 1 |
|---|---|
| Timer Type | Digital |
| Frequency | 60 Hz |
| Material | Plastic |
| Color | White |
Procedure for replacing the CR2032 Lithium battery for program memory retention.
Instructions on how to reset the sprinkler timer, especially for initial programming.
Step-by-step guide to setting the current time and date on the sprinkler timer display.
Details on setting watering schedules for specific days of the week or every second day.
Details on interval watering (1-28 days) or odd/even day watering schedules.
Setting watering schedules for specific days or every second day.
Programming start times, watering durations, and watering days for Program A.
Setting watering schedules using intervals or odd/even day logic.
Programming the initial watering start times for Program B.
Instructions for initiating automatic operation after programming is complete.
Manually advancing stations and turning the timer off.
How to temporarily delay watering for 24, 48, or 72 hours due to rain.
Adjusting watering duration by percentage for seasonal needs (10%-200%).
Setting multiple start times for a program to repeat watering cycles.
How to run all stations from both Program A and Program B sequentially.
How to run stations assigned to only Program A or only Program B.
Setting manual watering durations for specific individual stations.
Overview of the 5-step process for installing the sprinkler timer.
Criteria for choosing an appropriate and safe location for timer installation.
Instructions for physically mounting the sprinkler timer to a wall.
Guidance on installing the required CR2032 battery for memory retention.
Connecting the sprinkler timer to the irrigation system's electric valves.
Detailed steps for connecting individual valve wires to the timer terminals.
Instructions for connecting the timer to a power source, including indoor/outdoor options.
Guidelines for permanent electrical wiring connections to the timer.
Important safety guidelines and requirements for connecting AC power.
How to connect a rain sensor to stop watering during precipitation.
Connecting relays for pump start or master valve operation.
Contact information for Orbit® Technical Service for assistance.
Details on the product warranty and replacement policy.
Loading...