Do you have a question about the Orbit 57882 and is the answer not in the manual?
Instructions for replacing the CR2032 Lithium battery for program memory.
Procedure for resetting the sprinkler timer when first programmed.
Overview of the timer's control interface and buttons.
Steps to set the current time of day and date on the timer display.
Guide to creating a paper-based watering plan for timer programming.
Steps to set watering start times and durations for Program A.
Steps to set watering intervals or odd/even day schedules for Program B.
Instructions for activating automatic watering mode after programming.
How to review and modify existing watering schedules.
Functionality for delaying watering due to precipitation.
Steps to activate the 24, 48, or 72-hour rain delay function.
Feature to adjust watering duration by percentages for seasonal needs.
Feature allowing programs to run multiple times on the same day.
How to run both Program A and Program B simultaneously.
How to run Program A or Program B individually.
How to set manual watering durations for specific stations.
Criteria for choosing an appropriate installation location for the timer.
Steps for physically attaching the timer to a wall.
Instructions for inserting the required CR2032 backup battery.
Guide to connecting the timer to sprinkler valves.
Detailed steps for connecting individual valve wires to the timer terminals.
Instructions for connecting the timer to a power source.
Procedure for hardwiring the timer to the electrical supply.
How to connect a rain sensor and use the bypass switch.
How to connect a pump start relay or master valve.