Orbit ARC SPRINKLER - User Manual

To Next Page

Step 2: Slide and position the adjustment collar tabs

to set the outer boundaries of your coverage

area. The sprinkler head will rotate and spray

water between these two tabs.

Maximum Coverage: Slide the tabs together and

position them o to the side of the spray nozzles.

Add additional Precision Arcs to water more

area in less time

Remove the ﬂow through cap and attach an additional

outdoor garden hose and Precision Arc. Actual water

coverage depends on sprinkler settings and available

water pressure.

Step 3: Turn on the water and adjust the spray length

for each section in your coverage area using

the distance knobs.

Note: The adjustment arrow points to which distance

knob to turn. The knob is opposite the spray, preventing

you from getting wet while making adjustments.

When expecting freezing temperatures, Precision Arc

should be removed from the hose and stored indoors

to avoid potential freeze damage.

Filter traps dirt particles, prolonging life of your

Precision Arc. Clean ﬁlter regularly and replace if worn.

PRECISION ARC SPRINKLER

Adjustment

Arrow

Sprinkler Head

Dual Spray

Nozzles

Adjustment

Collar Tabs

Flow Through Cap

Distance Knobs

Swivel Inlet

Step-Spike

Base

Filter

Orbit

North Salt Lake, UT 84054

Customer Support

1-800-488-6156

orbitonline.com

Printers are responsible

for meeting print

production requirements.

Any changes must be

approved by Orbit

Printed piece must meet

designated specifications

on this form.

This work is the property

of Orbit

, and cannot

be used, reproduced or

distributed in any way

without their express

permission.

Dieline

PMS

0000

Fold

PMS

0000

Product

Coverage

PMS

0000

Dims./

Callout

PMS

0000

∙

Orbit

1.801.299.5555

orbitonline.com

Glue

Folded Flat Additional Information

PRIN TERS ARE

REQUIRED TO MATCH

ALL SP ECIFIED

PMS COLORS.

DATE: 09/19/2017

DESIGNER: NK MARKETING: CD

SOFTWARE: Adobe Indesign CC

ARTWORK №: 56805-24 rA

_._" W:

H:3.5"

4.25"

14.0"

8.5"

Tabs

Nozzles

Spray

Nozzles

Adjustment

Arrow

Step 1: Connect an outdoor garden hose to the swivel

inlet and insert the step-spike into the ground

by stepping on the base.

Note: If your ground is hard, soak it with water to

soften the soil before inserting the step-spike.

Turn the knob clockwise to shorten the spray distance

and counter clockwise to lengthen the spray distance.

Note: If the spray nozzles have moved past the distance

knob you are currently adjusting, do one of the following:

A) Rotate the sprinkler head back into position by

grabbing the sprinkler head and twisting it to the

spot you want to adjust.

B) Wait for the spray nozzles to return

to that location.

Working Water Pressure

Minimum: 20 PSI

Maximum: 70 PSI

Working Temperature

Maximum: Do not operate at temperatures exceeding 120°F

Minimum: Keep from freezing. To prevent damage from freezing

water, take the Precision Arc inside before the ﬁrst winter frost.

Warnings:

For cold water outdoor irrigation use only.

Do not spray near electrical connections.

second tab

ﬁrst tab

coverage area

Need help?

Do you have a question about the Orbit ARC SPRINKLER and is the answer not in the manual?

Summary

Precision Arc Sprinkler Overview and Specifications

Freeze Protection

Store indoors to prevent potential freeze damage when expecting freezing temperatures.

Filter Maintenance

Clean filter regularly to prolong sprinkler life and replace if worn.

Operating Parameters

Details working water pressure (20-70 PSI) and temperature limits (up to 120°F).

Installation Guide

Step 1: Connect Hose and Secure Base

Connect garden hose to swivel inlet and insert step-spike into ground by stepping on base.

Sprinkler Adjustments

Maximum Coverage Adjustment

Slide tabs together and position them off to the side of spray nozzles for maximum coverage.

Spray Distance Control

Turn knob clockwise to shorten, counter-clockwise to lengthen spray distance.

Setting Coverage Boundaries

Position adjustment collar tabs to set outer boundaries of coverage area.

Adjusting Spray Length per Section

Use distance knobs to adjust spray length; adjustment arrow indicates which knob to turn.

Expanding Coverage

Adding Multiple Sprinklers

Remove flow-through cap and attach additional units to water more area efficiently.

The Orbit Precision Arc Sprinkler is an outdoor irrigation device designed for watering lawns and gardens. It features a step-spike base for easy ground insertion and adjustable spray settings to customize coverage.

Function Description:

The Precision Arc Sprinkler connects to a standard outdoor garden hose via a swivel inlet. Once connected and inserted into the ground, it can be adjusted to spray water across a defined coverage area. The sprinkler head rotates, distributing water between two set boundaries. Users can control the spray distance for different sections of the coverage area using individual distance knobs. The device is designed for cold water outdoor irrigation only.

Important Technical Specifications:

Working Water Pressure:
- Minimum: 20 PSI
- Maximum: 70 PSI
Working Temperature:
- Maximum: Do not operate at temperatures exceeding 120°F
- Minimum: Keep from freezing.
Components:
- Sprinkler Head
- Adjustment Arrow
- Distance Knobs (multiple)
- Dual Spray Nozzles
- Adjustment Collar Tabs
- Flow Through Cap
- Swivel Inlet
- Filter
- Step-Spike Base

Usage Features:

Installation (Step 1): Connect an outdoor garden hose to the swivel inlet. Insert the step-spike into the ground by stepping on the base. If the ground is hard, it is recommended to soak it with water to soften the soil before insertion.
Maximum Coverage: To achieve maximum coverage, slide the adjustment collar tabs together and position them off to the side of the spray nozzles.
Setting Coverage Area (Step 2): Slide and position the adjustment collar tabs to define the outer boundaries of your desired coverage area. The sprinkler head will rotate and spray water between these two tabs.
Adjusting Spray Distance (Step 3): Turn on the water. Adjust the spray length for each section within your coverage area using the individual distance knobs.
- Turning a knob clockwise shortens the spray distance.
- Turning a knob counter-clockwise lengthens the spray distance.
- An adjustment arrow points to the specific distance knob being adjusted, which is opposite the spray, helping to keep the user dry during adjustments.
- If the spray nozzles have moved past the distance knob you are currently adjusting, you can either rotate the sprinkler head back into position by twisting it to the desired spot or wait for the spray nozzles to return to that location.
Expanding Coverage: Additional Precision Arc sprinklers can be connected in series to water a larger area. To do this, remove the flow through cap from the first sprinkler and attach an additional outdoor garden hose and another Precision Arc sprinkler. The actual water coverage will depend on the sprinkler settings and available water pressure.

Maintenance Features:

Freeze Protection: When freezing temperatures are expected, the Precision Arc Sprinkler should be removed from the hose and stored indoors to prevent potential freeze damage. To prevent damage from freezing water, take the Precision Arc inside before the first winter frost.
Filter Maintenance: The sprinkler includes a filter that traps dirt particles, which helps prolong the life of the device. The filter should be cleaned regularly and replaced if it becomes worn.