Orbit JETRONIC-BOX - Page 12

Orbit JETRONIC-BOX – Manual 1.2
24:@AIR~FAIL
Specifies the failsafe function that is activated when the air pressure falls below the minimum value
specified with 14:AIR-FAIL.
Typically, the failsafe function activates an ON signal at RC1 (=> extend gear). On the display, this
is indicated by a -! at the RC1 or RC2 status.
OFF: No air pressure failsafe function
OFF
→
RC1: Input RC1 is switched to OFF.
ON
→
RC1: Input RC1 is switched to ON.
OFF
→
RC2: Input RC2 is switched to OFF.
ON
→
RC2: Input RC2 is switched to ON.
Default setting: OFF
12