Orbit JETRONIC-BOX - 6:TEST-DEVICES Menu

Orbit JETRONIC-BOX – Manual 1.2
6:TEST-DEVICES Menu
To activate the 6:TEST-DEVICES menu, first press the SET key, then use the Up/Down keys to
switch between the available test functions.
To activate a test function, first press the SET key, then use the Up/Down keys to test the
respective system setting. A ? marks the setting to be applied. Press the SET key again to finish a
test.
To leave the 6:TEST-DEVICES menu and to return to the SETUP menu, press the SET key for
more than 2 seconds (ESC).
Pressing the SET key for more than 2 seconds again will return you to the operating status display
(
>>>
changes to
<<<
, ESC).
16