Orbit JETRONIC-BOX - Page 15

Orbit JETRONIC-BOX – Manual 1.2
35:RC3-MID
Specifies the middle position (MID)
Range: +-150 %
Default setting: +0 %
36:RC3-HIGH
Specifies the upper end position (HIGH).
Range: +-150 %
Default setting: +100 %
37:RC3-DELAY
Additional rotation delay between the positions 34:RC3-LOW and 36:RC3-HIGH
Range: 0 – 20 seconds
Default setting: 0.0 sec
These settings can be applied in the same way to the outputs RC4 and RC5.
15