Orbit JETRONIC-BOX User Manual

Orbit JETRONIC-BOX – Manual 1.2
15:AIR-NOMINAL
Specifies the nominal air pressure for the LED display (11:INFO-LED).
This parameter should be set to the pressure value nominally required for the model to take off.
Range: 14:AIR-FAIL – 10 bar
Default setting: 8.0 bar
16:RESET-ALL
Resets all JETRONIC-BOX settings to their default values.
The RESET must be confirmed with the SET key.
Default setting: NO
9

Orbit JETRONIC-BOX Specifications

General

Brand	Orbit
Model	JETRONIC-BOX
Category	Controller
Language	English