STEP 2
1. Fold down console as shown in diagram and lock it with 2pcs M8 knob screws on both sides. Be careful not to
pinch wires inside posts.
2. Take out 5mm wrench and 2pcs M6*10 screw, to lock the Ipad holder. Put the safety key on the proper
position.
3. Connect power cord to the correct power supply and switch on power. Treadmill console should light up and
it’s ready for use.
Warning: This treadmill must be grounded properly. It is equipped with a cord
connecting to an equipment-grounding conductor and a grounding plug. The 3
pin plug must be plugged into an appropriate power outlet that complies with
industrial codes and local requirements in relate to grounding.
DANGER
– Improper connection of the equipment-grounding conductor can
result in risk of electric shock. Check with a qualified electrician or serviceman
if you are in doubt as to whether the product is properly grounded. Do not
modify the plug provided with the product.
If it does not fit the power outlet, please have a proper outlet installed by a
qualified electrician. No adapter should be used with this product
STEP 3
To fold down treadmill, just unlock the 4pcs knob screws, and restore it into flat position as shown in below
diagram. Use 2pcs M10 knob screws to secure upright posts to main frame.
To Next Page
Loading...
Need help?
General
