9.1 Delete Bluetooth Administrator on the APP
Notice: please turn on the Bluetooth of your phone and keep it
close to the lock.
9. 1. 1 Activate the APP
9. 1. 2 select the lock
9. 1. 3 press [settings]
9. 1. 4 press [delete]
9. 1. 5 input the account password and press [OK]
9. 1. 6 The lock with 2 times "beep" means delete success.
9. 2 Delete Bluetooth Administrator on the lock
9. 2. 1 long press the reset button
9. 2. 2 Lock with 2 times "beep”
9. 2. 3 It means "Administrator deleted successfully"
6. 1 5 seconds after the lock is unlocked, it automatically locks
and gives a voice prompt "(locked)"(except it is set to passage
mode).
6. 2 The length of time before auto lock can be customized in the
[settings] menu of the lock.
7 low power warning
7. 1 when the battery is low, the keypad will light up and flash for
a second after it is activated, meanwhile the lock gives a voice
prompt "battery is low, please replace”.
8 keypad lockout
8. 1 When the user enters the incorrect password for 5 times (the
password length is greater than or equal to 4), the door lock will
beep twice, and the password keyboard will be locked for 5
minutes.
8. 2 During the lockout period, the keypad light will flash quickly
on each pressing. Unlocking with APP card or fingerprint is still
functional in this case, and the keypad will be back to normal
once it is unlocked successfully with an APP or a card
8. 3 The keypad will be re-enabled after 5 minutes lockout and
user can continue to input passcode. However, each wrong pass-
code trial will result in 5 minutes lockout thereafter.
9 Delete Bluetooth Administrator/restore to default factory
setting Warning: once the Bluetooth Administrator is deleted,
the lock is set to default factory setting , all previous passcodes
cards and fingerprints are invalidated.
14
13
WEB management login
Open browser and input: lock.orbitasmart.com, then input user
name and password (the ID is same as APP).
To Previous Page
Loading...